SINGER 15-91 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remove the bobbin case and bobbin. Take out
the thumb screw (D, Fig. 27), also the spring (C,
Fig. 27) and the shuttle race back (B, Figs. 27 and
28). The shuttle (A, Figs. 27 and 28) may now be
easily removed and the parts cleaned.
To Replace the Shuttle
See that the needle is at its highest position. Re
place the shuttle with its point (A) in the position
31
£9349
F
ig
. 28. S
huttle
and
P
arts
R
emoved
from
M
achine
shown in Fig. 28, then replace the other parts in the
order illustrated in Fig. 28. Replace and tighten the
thumb screw (D). Replace the bobbin and bobbin
case and close the slide in the bed of the machine.