SINGER 15-91 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
After considerable use, the stitch forming mechan
ism in the bed of the machine may become clogged
with lint and this may interfere with the perfect
operation of the machine.
Occasionally remove the shuttle, as instructed
below, and remove the lint, etc., which has accumu
lated in the machine.
To Remove the Shuttle
Draw to the left the slide in the bed of the ma
chine. Turn the balance wheel over toward .you
30
To Clean the Stitch Forming Mechanism
F
ig
. 27. S
howing
P
osition
of
S
huttle
for
R
emoval
from
M.
achine
until the needle is at its highest position and the
point of the shuttle is at the position shown in Fig. 27.