SINGER 15-91 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Adjustment and Operation of the Binder
The edge to be bound should be held well within
the center slot of the scroll (A, Fig. 43). If the
44
F
ig
. 43. A
djusting
the
B
inder
material is allowed to slip awa}^ from the scroll
when near the needle, the edge will not be caught
in the binding. With a little practice it is quite easy
to hold the edge in the scroll.
Various materials and conditions require different
adjustments of the Binder to bring the stitching
close to the edge. A wider adjustment of the Binder
is required when binding curves than is necessary
when binding a straight edge.
To adjust the Binder for stitching, loosen screw
(B, Fig. 43), and move scroll to the right for a nar
rower adjustment and to the left for a wider adjust
ment. Care should be taken to see that the screw
is well tightened after making an adjustment. To
become perfectly familiar with the adjustment of
the Binder, practice is necessary.