When darning flat work, it is advisable to use – SINGER 15-91 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
34
;
F
ig
. 30. D.'^.
rning
in
P
hoce
.
ss
When darning
flat work, it is
advisable to use
e m b r o i d e r y
hoops to hold
the work.
Place the work
in the machine,
having the un
worn part near
the hole under
the needle. Com
mence the darn
ing by making a
line of stitches across the hole a little longer than
the width of the hole. Continue making parallel
lines of stitches across the hole, moving the work
backward and forward and at the same time grad
ually moving the
work sidewise
until the hole is
-
covered
with
lines of stitches
running
across
the hole. Then
c o m m e n c e a s
before and move
the work length
wise of the hole
until the stitches
across the hole
are
completely
covered and the
darn is finished.
F
ig
.
31.
D
arning
F
inished