Rmon – SINGER 15-91 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To insure easy running, the machine requires
oiling and if used continuously it should be oiled
25
To Oil the Machine
i /
rmon
F
k
;. 22. FaoxT V
iew
, S
howing
O
iling
P
oint
.
s
each daAV With moderate use, an occasional oiling
is sufficient. Oil should be applied at each of the
places shown by unlettered arrows in Figs. 22 to 25,
inclusive. One drop of oil at each point is sufficient.
Oil holes are provided in the machine for bearings
which cannot be directly reached.
Draw to the left the slide in the bed of the machine
and after removing the lint and dust which may
have accumulated (see instructions on pages 30
and 31), apply oil to the shuttle race (A, Fig. 27).
The slide should then be closed.