Instructions for using the attachments – SINGER 15-91 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTIONS FOR USING THE
ATTACHMENTS
36
The Foot Hemmer
The Foot Hemmer (Fig. 32)
is attached to the machine in
place of the presser foot. Raise
the needle to the highest posi
tion, loosen the thumb screw
which clamps the presser foot to
the presser bar and remove the
presser foot. Attach the Foot
Hemmer to the bar, taking
care to tighten the screw firmly
so that the Hemmer will not
become loose when the machine
is running. Turn the balance
wheel slowly to make sure that the needle goes
through the center of the needle hole and that the
lower thread is properly pulled up.
TZ9_Z#J
F
ig
. 32. T
he
F
oot
H
emmer
How to Start the Hem at the Very Edge
How to start the hem at the very edge of the
material is of great importance in learning to use
the Hemmer. If the hem is not started at the edge
and the material is pulled bias a perfect hem cannot
be made.