SINGER 15-91 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
58
To Make a Ruffle and Sew xt to a
Garment in One Operation
Insert the material to be ruffled between the two
blue blades, as shown in Fig. 61, following the line
F
i g
. 6 1
2, in Fig. 59. Place the garment to which the
ruffle is to be attached, under the separator blade,
following the line 1, in Fig. 59. Pi’oceed the same
as for gathering.
The edge of the ruffled seam can be bound by
using the binder.
To Ruffle and Sew on a Facing
in One Operation
Insert the material to be ruffled between the two
blue blades, following the line 2 in Fig. 59. Place
the garment to which the ruffle is to be attached,
under the separator blade, following the line 1, in
?ig. 59. Place the material for the facing over the
ipper blue blade, as shown in Fig. 62, following
,he line 3, in Fig. 59. The facing may be straight
)r bias material. If the facing is to be on the
'ight side of the garment, place the garment and