Adjusting feed dog height – SINGER W511 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING FEED DOG HEIGHT
(TWIN NEEDLE UPPER THREADING)
Follow threading instruction for single needle with
Place thread, matching or contrasting in color, on
both spool pins.
Draw threads through thread guides as normal, but
separate the threads at the tension.
Pass thread through the left disc and one thread
through the right disc.
Now treat both threads as one until you reach the
ZIGZAG DIAL: Set at desired width between "0" and
"3", if you set dial higher than 3, the needle will hit the
needle plate and break.
STITCH LENGTH: Set at desired stitch length.
Upper position of feed dog is used for normal sewing.
To raise feed dog.
Press drop feed button "-Allocated under shuttle cover,
to upper position.
Lower position is used for Embroidering, Mending or
Sewing on Button. Press drop feed button to