Wma/mv, Zigzag stitching, Wvwvw – SINGER W511 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ZIGZAG STITCHING
Zigzag Foot
(
single
needle
sewing
)
•
Set the needle position dial in the free position.
•
Set the zigzag width control knob from 1 to 5.
•
Set the stitch length control dial from 1 to 4.
•
Now you can start sewing as you wish.
Single Needle Sewing
Zigzag Width Control Dial
SINGLE NEEDLE ZIGZAG STITCH PATTERNS
Patterns
Needle Position
Stitch Length
Zigzag Width
WVWvW
Left, Middle
or Right
Long
mmmmm
Left, Middle
or Right
Short
Any point from 1 to 5
wmA/mv
Left, Middle
or Right
Long and Short
(Repeat)
Left 1
Long
Set the indicators of
zigzag width restricting
knob 0 and 5. Gradually
move from 0 to 5 and
return to 0. (Repeat)
I
Middle 2
Right 3
Left 1
Short
Zigzag width can be
regulated by zigzag
width control. Turn
quickly the control
alternately.
Middle
2
Right
3
18
(
twin
needle
sewing
)
ZIGZAG DIAL:
Set at desired width between 0 and 3.
If you use beyond 3, needle hits the
needle plate and breaks.
STITCH LENGTH:
Set at desired stitch length.
Note: Upper threading for twin needle is
followed same way as single needle
Needle Position: Set at " 1 "
left hand needle position.