Monogramm ing, Procedure – SINGER W511 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MONOGRAMM ING
Needle Position Selector and
Zigzag Width Control Dial
PROCEDURE:
•
For free-nnotion sewing, press drop feed button,
and press down on outer ring of the pressure regulator
to release pressure completely.
•
Place under needle of fabric into an embroidery, a
darning and a monogramming hoop.
•
With the width at "O" make 5 or 6 stitches to
reinforce the starting point
•
At the desired zigzag width stitch to outline the
design by moving the fabric and hoop in a side
motion. To fill the design, move the fabric and
hoop from side to side in a rhythmic motion.
•
To return feed to normal, press drop feed
button, and push down on the pressure cap to
obtain the desired setting.
29