To connect the foot control wires, To use the foot pedal – SINGER W511 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
USING THE FOOT CONTROL
TO CONNECT THE FOOT CONTROL WIRES:
• Connect special plug to block on machine as
shown in diagram above.
• Connect outlet plug to electrical outlet.
• When sewing, keep children’s hands away from
foot control.and wiring.
• After sewing, disconnect plug from electrical
outlet.
TO USE THE FOOT PEDAL:
• Begin sewing by turning the hand wheel toward
you and apply gradually increasing pressure to
foot pedal.
• Sewing at a constant speed will give best results.
Advertising