Sewing on zippers – SINGER W511 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING ON ZIPPERS
Regular Zipper Foot
Needle Position Selector arKi
Zigzag Width Cor^trol Dial
Set the needle position at " 1 " or " 3 " as needed
to sew the right side or the left side of zipper
respectively, so that the foot sews very close to
the zipper teeth. (Fig. 1)
Set the needle position at " 3 " and make the
welting by sandwiching the cord into a bias
strip of fabric. Stitch close to cord. (Fig. 2)
Set the needle position at " 1". Sandwich the
welting between two layers of fabric with right
sides together. Stitch a second time. The needle
stitches close to the cord through all thicknesses
• Attach zipper foot and adjust position depending on which side
of zipper foot you wish to use.
• Open the zipper and place it face down on the back side of the
fabric with the zipper teeth along the fabric edge.