Functions of controls, Zigzag width control dial, Stitch length control dial – SINGER W511 User Manual
Page 16: Reverse stitch button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FUNCTIONS OF CONTROLS
NEEDLE POSITION AND
PATTERN SELECTOR DIAL
• Raise needle bar to highest
position by turning hand wheel
toward you.
• Select desired pattern and
needle position.
• Selector dial can be turned
either clockwise or counter
clockwise.
ZIGZAG WIDTH CONTROL DIAL
• For wider zigzag stitch,
select a higher number.
• When twin needle is used,
zigzag must be limited between
positions “0” and "3” on the
dial (use of twin needle in
position higher than “3” will
result in needle striking
needle plate).
STITCH LENGTH
CONTROL DIAL
• Numbers on dial denote
length of stitches.
• To increase length of stitch,
turn dial to higher number.
STITCH LENGTH GUIDE
Numbers
on dial
0
1
2
3
4
Stitches
per inch
No
Feed
24
12
8
6
REVERSE STITCH BUTTON;
• Use for reverse stitching or
tacking.
• Keeping button pressed in will
allow you to sew reverse stitch
at same length as forward
stitch.
15