To wind thread onto bobbin – SINGER W511 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING THE BOBBIN
TO DISENGAGE THE HAND WHEEL:
• Hold the hand wheel (1) with left hand, turn
clutch (
2
) counterclockwise with right hand to
disengage as shown.
TO WIND THREAD ONTO BOBBIN:
• Lead thread through spring thread guide (4) and
through the hole in your bobbin from the inside
out.
• Place the bobbin onto the bobbin winder shaft
(3).
• Push the bobbin winder to the right.
• Hold loose end of thread firmly and turn hand
wheel to make thread tight. Apply gradual
pressure on foot pedal until automatic shut off
disengages bobbin winder.
• Cut off loose end of thread.
Advertising