Inserting the bobbin – SINGER 1116 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
□ Inserting the bobbin
When inserting or removing the bobbin, the needle must be
fully raised.
Open the hinged cover (1).
Pull the hinged latch to release the bobbin case from the
bobbin shuttle (4).
Hold the bobbin case with one hand. Insert the bobbin so that
the thread runs in a clockwise direction (arrow) (2).
Pull the thread through the slit and under the finger (3).
Hold the bobbin case by the hinged latch (4).
Insert it into the shuttle (5).
Attention:
Turn power switch to “off.
10
Advertising