Zippers and piping – SINGER 1116 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Zippers and piping
Select stitch: A
Stitch length: 2 •
Stitch length dial
4, depending on thickness of fabric
The zipper foot can be attached to the right (1) or left (2)
depending on which side of the foot you are going to sew.
To sew past the zipper pull, lower the needle into the fabric,
raise the presser foot and push the zipper pull behind the
presser foot. Lower the foot and continue to sew.
It is also possible to sew in a length of cord into a bias strip to
form a ‘welt’ (3) or attach piping and other trims.