Reverse sewing, Removing the work, Cutting the thread □ removing the work – SINGER 1116 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

□ Reverse sewing

To secure the beginning and the end
of seam, press down on the reverse
sewing lever. Sew a few reverse
stitches. Release the lever and the
machine will sew forwards again (A).

□ Cutting the thread

□ Removing the work

Turn the handwheel
counterclockwise to bring the thread
take up lever to its highest position,
raise the presser foot and remove

work behind the needle and presser

Cutting the thread:
Pull the threads behind the presser foot. Guide the

threads to the side of the face plate and into thread
cutter (B). Pull threads to cut.