SINGER 14U64A User Manual
SINGER Sewing machines
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 14
- 14Ü64A
- 4. Chair, off and test sew
- Adjust thread tension to suit the type of material and si2e of the thread used. The thread tension dials on this machine are a one-tum system and as the number on the thread tension dials increases, the thread tension becomes tighter.
- 1) 2-needle. 4-thread overedge stitching.
- Be sure the threads are correctly threaded otherwise proper thread tension cannot be obtained (See page 6).
- Set each of the thread tension dials to the settings shown below and test sew.
- With following figure as reference, adjust the thread tension dials to obtain correct tension.
- 2) Standard 1-needle, 3-thread overedge stitching
- This machine can do I -needle. 3-thread overedge stitching by using only the right needle.
- Be sure the threads are correctly threaded otherwise proper thread tension cannot be ohtzined (See page 6).
- Set each of the thread tension dials to the settings shown below and test sew.
- With following figure as reference, adjust the thread tension dials to obtain correct tension.
- 6. Hcv7 to Eojost Stitch length
- 7. Hcvr to ae|ost overedge seam width
- 12. Vcristicn stitch
- 13. r-cv;t3 rsp^£C3 r.ssd^ss
- 14. Hcv; to rsplccs st£t:oo£ry koifs
- 15. How to exchange light bulb
- 16, to £¿7^31 crasser foot pressi
- 18, Reasons for poor stitches ar.o hc*A* tc ntaks Ezyss’lrr.ent
- 21. Specificatio!