SINGER 5147 User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- CHANGING THE NEEDLE
- CHANGING PRESSER FEET
- To Remove and Replace Foot
- REMOVING AND REPLACING NEEDLE PLATE
- ATTACHING SNAP-IN FEED COVER
- ATTACHING THE SEAM GUIDE
- CONNECTING THE MACHINE
- ADJUSTING BOBBIN-THREAD TENSION
- SPOOL HOLDERS
- ADJUSTING STITCH LENGTH
- Setting the Dial
- NEEDLE-THREAD TENSION
- BOBBIN-THREAD T-ENSION
- ZIPPER INSERTION
- PATTERN SELECTOR
- STITCH WIDTH SELECTOR
- ADJUSTING NEEDLE-THREAD TENSION
- ADJUSTING STITCH LENGTH
- ADJUSTING PRESSER FOOT PRESSURE
- Accessory and Selector Settings
- ADJUSTING STITCH LENGTH
- ADJUSTING NEEDLE-THREAD TENSION
- APPLIQUÉ
- Preparation
- Method 1 - Trimming after Stitching
- Method 2 - Stitching after Trimming
- awvwwwwvwi
- SELECTING A PATTERN
- ADJUSTING STITCH LENGTH
- ADJUSTING WIDTH OF DESIGN
- GUIDING AND SUPPORTING FABRIC
- ADJUSTING PRESSURE WHEN SEWING KNit AND STRETCH FABRIC
- BLINDSTITCH
- Blindstitch Hems
- SLANT OVEREDGE STITCH
- Overedged Seams
- BUTTONHOLE POSITION
- BUTTONHOLE LENGTH
- FOUR-STEP BUTTONHOLING
- Preparation
- Step A: Side Stitching
- Step B: Bar Tack
- Step C: Side Stitching
- Step D: Bar Tack
- CLEANING AND OILING YOUR MACHINE
- CHANGING THE LIGHT BULB
- Removing Bulb