Nespresso Citiz & Co EF 488 - Manual (Page 100)

Citiz service manual 100
R E P A I R S
Assembly checkpoints
• Adjust position of pump connector (23) towards hose (28) if necessary.
• Check condition of supports (21, 22). Replace brittle supports.
• Pass hose (28) from pump to self priming device through lug on pump cover (25).
• Use a cable clamp (a) to fix pump wires (different location depending on thermo
fuse/thermostat).
The white plastic Iid
on the pump is rotata­
ble and has a square
seat for the fork wrench.