3 replacing pump, General – Nespresso Citiz & Co EF 488 User Manual
Page 98
Advertising
Citiz service manual
98
R E P A I R S
8.7.3 Replacing pump
General
The pump (18) can only be replaced as assembly consisting of
pump, prewired with thermostat (19, see below) or thermal cut off fuse (a)
2 pump supports (21, 22)
pump cover (25).
A blown thermal cut off fuse (a) has to be replaced together with the pump assembly.
A tripped thermostat (19) resets after about 30 min automatically.
The pump is
equipped either with
a thermal cut off fuse
or a thermostat depending
on the voltage range or
manufacturer.
a) Thermal cut off fuse
19) Thermostat with retaining clip
Advertising
This manual is related to the following products: