Nespresso Citiz & Co EF 488 - Manual (Page 87)

Citiz service manual 87
R E P A I R S
8.6.4 Replacing power cord
• Remove insulated faston receptacle of phase wire (55) from mains switch (54).
• Disconnect both insulated adapter plugs of neutral wire (55).
• If a ground wire is present, disconnect both flat receptacles (15).
• Unlatch cable bracket (56) with screwdriver.
Use a pair of flat pli­
ers to pull off insulat­
ing sleeve with recep­
tacle.
The flat receptacles
of the ground wire
connections (15)
have a special connector
latching (see detail). Press
down lever at first, then pull
off receptacle.
The cable bracket is
under tension. There­
fore, hold the cable
bracket with your finger
when unlatching it.