Dish Network Solo 811 - Manual (Page 17)

Page 12
Chapter 2
Receiver Description and Installation
System Info Button
Press the SYSTEM INFO button to open the System Info screen.
Cancel Button
Press this button to cancel and return to the previous menu or to watch a
program if there are no previous menus.
Power Button
Press the POWER button to turn the receiver on or off. Be sure to turn off the
satellite receiver so that your Program Guide and other system information
remains current.
Mode Lights
These lights indicate that the receiver is on and operating in either SATELLITE
mode or OFF-AIR mode. The SATELLITE mode light is blue and the OFF-
AIR mode light is yellow.
Note: When both of the
MODE lights are off, the receiver continues to work
and requires power for system updates. Don't unplug the receiver unless you
need to move it.
IR Sensor and IR Blasters
The INFRARED (IR) SENSOR receives IR signals from the remote control.
The IR BLASTER transmits IR signals to control a VCR in order to perform
automated recordings.