Dish Network Solo 811 - Manual (Page 8)

Page 3
Page 3
Quick Start Guide
Quick Start Guide
After your system has been installed, order and watch your programming using
the following steps:
Step 1: Ordering Your Programming
1. Using your remote control, press SAT, and then press the blank
POWER button. Make sure the TV is also on.
2. Press GUIDE. You will see that some channels in the
Program Guide appear in white. These channels can be
viewed immediately. However, many channels will be in red.
You cannot view these channels until you order programming.
3. Press the SYSTEM INFO button on the receiver's front panel to display the
System Info screen.
Note : The screen shown here is just an example. You will see numbers and
information for your receiver.
4. Call the Customer Service Center at 1-800-333-DISH (3474). A customer
service representative will discuss the various programming packages
available.
5. Choose a package and the representative will authorize your programming.
6. Select Cancel to close the System Info screen.
Tip: Channels that
appear in red can’t
be viewed because
they are not part of
your subscription.
You can add
channels to your
subscription
simply by calling
DISH Network at
1-800-333-DISH.