Dish Network Solo 811 - Manual (Page 68)

Page 63
Display Options for Local Channels
Page 63
Display Options for Local Channels
If you have not yet connected an off-air antenna or cable source
to the receiver, first see Initial Set Up for Off-Air Broadcasts or
Cable on page 25 for details.
You can set up your local channels in the Program Guide for viewing
either with your local channel numbers or the DISH Network four digit
numbers. Digital off-air channels will always be displayed in the 2-99
channel range.
To display the options available for local channels 2-99:
1. Select Display Options on the Local Channel Setup screen (6-1-5 on
your remote).
2. Select one of the following:
• DISH Network Locals to display your subscribed DISH Network
locals at the broadcast channel number.
• Off-Air Antenna Locals to display the local analog channels from
your off-air antenna at the broadcast channel number. Your
subscribed DISH Network locals will remain at the four digit
channel number designation.
Changing Program Languages
You may be able to change the language of some programs. An alternate
language may not be available for all programs. Some programs, such as
movies, show at the start whether an alternate language is available. An
alternate language applies only to the audio part of a program and does not
change the language used in the menus displayed by the receiver.
1. Press the MENU button.
2. Select the System Setup option.
Tip: You can
choose an
alternate language
(if available) but
this applies only to
the audio part of a
program and does
not change the
language used in
the menus
displayed by the
receiver.