Dish Network Solo 811 User Manual
Page 56
Page 51
Using Timers
Page 51
6. If you want to change the
Start Time
, the
End Time
, or the
Date
, select
the Date/Time option to display the
Set Date/Time
. Otherwise, skip to
step 9, below.
7. Use the NUMBER PAD buttons to enter the
Start Time
(this includes
selecting
AM
or
PM
) and the
End Time
(this includes selecting
AM
or
PM
).
8. Use the NUMBER PAD buttons to enter the
Date
.
9. Select the
Create Timer
option.
10. To edit another event timer either highlight that timer and select the
Edit
option again, or if you do not want to edit another event timer, press the
CANCEL button.
Deleting an Event Timer
1. Press the MENU button.
2. Select the
Timers
option. The receiver displays the
Timers
menu.
3. Select an event timer that you want to delete. A check mark appears in
the box next to the event timer.
4. Move to
Delete
and press SELECT/OK on the remote.
5. Repeat these instructions for any other timer(s) that you want to delete.