Dish Network Solo 811 - Manual (Page 76)

Page 71
Control Other Devices with the Remote
Page 71
SELECT/OK Button
This SELECT/OK button works as the Input Select button for
a tuner or amplifier.
Up/Down (Arrow) Buttons
Use UP/DOWN ARROW buttons to change channels on
the tuner or amplifier.
Mute Button
Press the MUTE button to turn off the sound. Press it again
to restore the sound.
Volume Button
Press the minus (-) side of this button to lower the sound
volume. Press the plus (+) side of this button to raise the
sound volume.
Switching Between TV and Device Volume Control
When you set up the remote to control a TV, the MUTE and VOLUME
buttons control the TV volume. However, if you want to use the AUX mode
to control a tuner or amplifier and the device has a volume setting, you can
set up the remote to control the device’s volume instead of the TV volume.
Set the Remote to Control the Device Volume
1. Press and hold the AUX mode button until all the other mode
buttons light, then release.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME button.
4. Press the 0 number button.
5. Press the POUND (#) button.
The AUX mode button flashes three times.
6. Press the SAT mode button.
7. Press the plus (+) and minus (-) sides of the VOLUME
button. The device’s volume changes and the AUX mode button lights
instead of the TV mode button.