Chapter 5, Reference, On-screen messages – Dish Network Solo 811 User Manual

Page 83: Page 78

Advertising
background image

Page 78

Reference

Chapter 5

On-Screen Messages

This table describes some on-screen messages in the order of their message numbers. Find the message

number in the upper right corner of the message displayed on your TV screen, and then find the matching

number in this table.

Message Number

Possible Reason

What to Do

001

There may be a problem with the

multi-dish switch.

Check the coaxial cables and their connections to and from the

multi-dish switch. Make sure that all required cables are in place,

and check that all cable connections are tight and dry (for outdoor

cables).

If this does not work, call the Customer Service Center for help.

002

Heavy rain, snow, or cloud cover

may be interfering with transmission

of the satellite signal, or there may

be other interference.

Note the local weather conditions. Remove any snow or other

debris which may have collected on the satellite dish.

Make sure that the satellite dish has a clear line of sight to the

satellite. Check whether branches or leaves have grown into the line

of sight.

Make sure that the satellite dish is aimed at the satellite. Check the

strength of the signal using the Point Dish/Signal menu. Consult

your installer to re-aim the dish, if necessary, to obtain the strongest

possible signal.

003, 004

The wrong type of coaxial cable may

be used in the system, or the cable

run length may be too long. Or, there

may be a problem with the multi-

dish switch.

Make sure the system uses RG6 coaxial cable; if not, call your

dealer or installer.

Check the dish-to-receiver cable run length; if it is over 200 feet on

your DISH Pro system, (100 feet with a Legacy system) call your

dealer or installer.

Check the coaxial cables and their connections to and from the

multi-dish switch. Make sure that all required cables are in place,

and check that all cable connections are tight and dry (for outdoor

cables).

If this does not work, do the Check Switch test.

005

The receiver may not yet have been

electronically linked with the Smart

Card, via the satellite signal. The

satellite dish may have moved so

that it is no longer picking up the

satellite signal. The cable

connections may have loosened or

have moisture inside. There may be

an interruption of the satellite signal.

If you have authorized the receiver, wait a few minutes to see if the

message is removed. Make sure that all required cables are in place,

and check that all cable connections are tight and dry (for outdoor

cables).

Make sure that the satellite dish has a clear line of sight to the

satellite. Check whether branches or leaves have grown into the line

of sight.

Check that the Signal Strength bar in the Point Dish/Signal

menu is green and displays the word Locked. If not, contact your

installer to re-aim the satellite dish. If you have not authorized the

receiver, call the Customer Service Center for help.

006

The receiver may not be connected

to an active telephone line.

The Smart Card credit limit may

have been suspended.

You must connect the receiver to an active telephone connection at

all times. If you install two or more receivers, you must connect

each receiver to an active telephone connection at all times.

Review your Pay-Per-View purchases to check the Smart Card

credit limit.

008

Phone signal not working correctly.

If connected with DSL phone line, install a DSL filter between the

receiver and the telephone wall jack. You can obtain the filter from

your DSL provider.

011, 012

Viewers in specific areas are

prohibited from watching certain

programs.

For example, viewers who live close

to a particular football stadium may

be prohibited from watching football

games that are played in that

stadium.

Remember that the program providers specify which programs

are “blacked out” for which viewers, not DISH Network.

013, 014

You may have tried to tune to a

program on a channel which you

have not bought.

You must buy a channel before you can tune to a program on that

channel. Call the Customer Service Center to buy the channel, or if

you believe this message was displayed by mistake.

Advertising
This manual is related to the following products: