Dish Network Solo 811 - Manual (Page 73)

Page 68
Chapter 3
Using the System
Control a TV (or a Second TV)
TV Mode Button
To use the remote to operate a television, you must press the TV
mode button to set the remote to TV mode. The TV mode button’s
back light turns ON to show that the remote is set to TV mode.
Make sure to keep the remote in TV mode to use the buttons as
described in this section.
Input Button
If the TV has video input options, use this button to switch the TV
among those options.
Power Button
Press the TV POWER button to turn the television ON or OFF.
Mute Button
Press the MUTE button to turn off the sound. Press the button
again to restore the sound.
Volume Button
Press the minus (-) side of this button to lower the sound
volume. Press the plus (+) side of this button to raise the
sound volume.
Select/OK Button
The SELECT/OK button works as the Enter button for a TV.
Up/Down (Arrow) Buttons
Use the UP/DOWN ARROW buttons to change channels
on the TV.
Recall Button
Press the RECALL button to return to the last channel you were watching.
Press it again to switch between the last two channels that you watched.