Dish Network Solo 811 - Manual (Page 32)

Page 27
Initial Set Up for Off-Air Broadcasts or Cable
4. Select the Save option to add the channel. This opens the Edit Local
Channel Name menu:
Highlight a letter and press the SELECT/OK button. Do this again to spell
out the channel name. You can enter up to five characters. If you need to,
use the SPACE option to insert a space or the <BACK option to correct a
letter. When you are done entering the channel name, select the Save
option. This opens the Local Channel Setup menu again.
5. Repeat steps 3 through 5 if you want to add another local digital channel.
6. To delete one or more channel(s), select the channel(s) in the
Channels list
and then select the Remove option.
7. Select the Save option to leave the Local Channel Setup menu.
How to Add Local Off-Air Analog Channels
To add a local analog channel:
1. Press MENU 6-1-5 to open the Local Channel Setup menu.