Dish Network Solo 811 - Manual (Page 29)

Page 24
Chapter 2
Receiver Description and Installation
6. Connect the A UDIO D IGITAL O UTPUT or the P HONO (R CA ) A UDIO
O UTPUTS on the receiver, as needed, to the corresponding HDTV audio
inputs to hear sound.
Note: The default resolution on both HDTV outputs is 480p until the
receiver is authorized and subscribed to a qualifying programming package
and the desired HDTV resolution has been selected.
Connecting Your Receiver to a Phone Line
You must keep the receiver connected to an active telephone line. Otherwise,
you may not be able to order Pay-Per-View programs or use all of the dish
home Interactive TV features. Run a telephone cable with a standard RJ-11
connector from the receiver's back panel P HONE J ACK to an active telephone
connection.
Note : You may be able to use a wireless telephone extender. However, this may
not support all the features of your receiver, such as Caller ID.
You must also set up the receiver for your telephone system (touchtone or
rotary/pulse), and set a telephone number prefix, if you need a prefix to make an
outside call.
1. Display the Installation and Setup menu (press MENU then 6-1).
2. Select the Telephone System option (4) to display the Telephone System
Setup menu.
3. Select the Touch Tone or the Rotary/Pulse option in the Phone Type list.
4. If you do not need a dialing prefix to call outside your premises, select the
Save option, and stop here. If you do need to set a prefix to dial outside
your premises (for example, dial 9 to get an outside line), go to step 5.
Note : Usually, you need a telephone number prefix only for business
installations. For most residential installations, all you need to do is set the
telephone system type.
5. Move the highlight to the
Outside Line Prefix list. Press the SELECT/OK
button to select the highlighted option.
Tip: If the receiver
is connected to
a phone line
with Digital
Subscriber Line
(DSL), you may
need to install a
DSL filter between
the receiver and
the telephone
jack. You can
obtain the filter
from your DSL
provider.