ADLINK PCM-9112+ - Manual (Page 18)

10 • Installation
2
Installation
This chapter describes how to install the 9112 series cards. Please follow
the steps carefully.
• Check what you have (section 2.1)
• Unpacking (section 2.2)
• Check the PCB and jumper locations (section 2.3)
• Setup jumpers (section 2.4~2.8)
• Install the hardware (section 2.10)
• Install the software drivers and run utility to test (section 2.11)
• Set cabling with external devices (section 2.9 and 2.12)