ADLINK PCM-9112+ - Manual (Page 19)

Installation • 11
2.1 What You Have
In addition to this User's Guide, the package should include the following
items:
• PCI-9112 or cPCI-9112/R Enhanced Multi-function DAS Card
• ADLINK Software CD
• Software Installation Guide
If any of these items are missing or damaged, contact the dealer from whom
you purchased the product. Save the shipping materials and carton in case
you want to ship or store the product in the future.
2.2 Unpacking
The card contains electro-static sensitive components that can be easily be
damaged by static electricity.
Therefore, the card should be handled on a grounded anti-static mat. The
operator should be wearing an anti-static wristband, grounded at the same
point as the anti-static mat.
Inspect the card module carton for obvious damages. Shipping and handling
may cause damage to your module. Be sure there are no shipping and
handling damages on the modules carton before continuing.
After opening the card module carton, extract the system module and place it
only on a grounded anti-static surface with component side up.
Again, inspect the module for damages. Press down on all the socketed IC's
to make sure that they are properly seated. Do this only with the module
place on a firm flat surface.
Note: DO NOT ATTEMPT TO INSTALL A DAMAGED BOARD IN THE
COMPUTER.
You are now ready to install your card.