ADLINK PCM-9112+ - Manual (Page 91)

Appendix A Demo Programs • 83
Appendix A. Demo Programs
DOS Examples:
There are 8 DOS demonstration programs available in the software CD. They
can provide assistance when programming your application using C
programming Language. The description of these programs are specified in
the table below:
AD_DEMO1.C:
A/D conversion using software trigger and
program data transfer.
AD_DEMO2.C
A/D conversion using interrupts and program
data transfer.
AD_DEMO3.C: A/D conversion using DMA data transfer.
AD_DEMO4.C:
A/D conversion using software trigger and
program data transfer.
(Autoscan enable, multi-channel)
AD_DEMO5.C
A/D conversion using interrupt and program
data transfer.
(Autoscan enable, multi-channel)
AD_DEMO6.C:
A/D conversion using DMA data transfer.
(Autoscan enable, multi-channel)
AD_DEMO5.C:
Continuous A/D conversion using DMA
transfer
DA_DEMO.C: D/A conversion
DIO_DEMO.C:
Read/Write data from digital input/output
channels
Windows 95 DLL:
There are several demonstration programs for Windows 95 DLL. They can
provide assistance when programming your application using C/C++ or
Visual Basic Language to link DLL libraries.