ADLINK PCM-9112+ - Manual (Page 8)

How to Use This Guide • iv
How to Use This Guide
This manual is designed to help the users to understand and configure the
PCI-9112 and cPCI-9112. The functionality of both the PCI-9112 and cPCI-
9112 are the same. Therefore, the “PCI-9112” in this manual represents
both the PCI-9112 and cPCI-9112 unless otherwise specified. The manual is
divided into 7 chapters:
Chapter 1, “Introduction”, gives an overview of the product
features, applications, and specifications.
Chapter 2, “Installation”, describes how to install the PCI-9112.
The layout of PCI-9112 is shown, jumper setting for
analog input channel configuration, D/A reference
voltage settings are specified. The connectors' pin
assignment and how to connect external signals and
devices are also described.
Chapter 3, “Registers”, describes the details of the register
structures of the PCI-9112.
Chapter 4, “Operation Theory”, describes how to operate the PCI-
9112. The A/D, D/A, DIO and timer/counter functions
are introduced. Some programming concepts are also
specified.
Chapter 5, “C/C++ Library”, describes the software utility and
libraries of the PCI-9112, and also describes how to
install and operate the utility and libraries to meet your
requirements.
Chapter 6, “Calibration”, describes how to calibrate the PCI-9112
for accurate measurements.
Chapter 7, “Software Utility”, describes the software utilities,
which is associated with the card.