ADLINK PCI-7442 - Manual (Page 38)

26 Hardware Information
2.6 Board ID (S1)
The Board ID feature helps you identify the modules when two or
more PCI-7440 Series cards are installed in one system. Accord-
ing to a DIP switch configuration located in the S1, you can assign
a specific board ID to a designated card and access it correctly
through simple software programming.
The table below shows all the switch settings. 1 means DIP is at
ON position; 0 means that the DIP is OFF.
Table 2-3: Board ID Settings
Note: 1 = ON, 0 = OFF
Default setting is 1111 or
Board ID = 0
Board ID
Switch No.
1 2 3 4
0 1 1 1 1
1 0 1 1 1
2 1 0 1 1
3 0 0 1 1
4 1 1 0 1
5 0 1 0 1
6 1 0 0 1
7 0 0 0 1
8 1 1 1 0
9 0 1 1 0
10 1 0 1 0
11 0 0 1 0
12 1 1 0 0
13 0 1 0 0
14 1 0 0 0
15 0 0 0 0