ADLINK PCI-7442 - Manual (Page 76)

64 Register Format
1: Function is enabled
0: Function is disabled
Address: BASE+0x3Ah
Reset Value: 0x0000h
Read/Write: R
-- ARDYS SRDYS RBRDYS SOES WIS WDTES HRHES
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
-- -- -- -- -- -- -- --
Bit15 Bit14 Bit13 Bit12 Bit11 Bit10 Bit9 Bit8
Bit15 - 7 Not used
Bit6 ARDYS: Flash Data Read/Write Finished Status
1: Process is not finished.
0: Process is finished.
Bit5 SRDYS: DO Data Sending Finishes Status
1: Process is not finished.
0: Process is finished.
Bit4 RBRDYS: DO Read Back Data Ready Status
1: DO read back data is not ready.
0: DO read back data is ready.
Bit3 SOES: Safety Out Enable Status
1: Function is enabled.
0: Function is disabled.
Bit2 WIS: WDT Interrupt Status
1: The WDT interrupt has asserted.
0: The WDT interrupt did not assert.
Bit1 WDTES: WDT Interrupt Enable Status
1: Function is enabled.
0: Function is disabled.
Bit0 HRHES: Hot Reset Hold Enable Status
1: Function is disabled.
0: Function is enabled.