GoDEX EZ6000Plus series - Manual (Page 35)

31
EZ-2000+/6000+ User ’s Manua
3-9. WLAN Module Installation
1 Ethernet Cable 1.8M
2 Secure Screw*2
3 Bracket Screw*2
4 Module Bracket
5 WLAN module
6 Module Connection Wire
7 WLAN Antenna
8 Nut (for Antenna)
9 Washer (for Antenna)
10 Antenna Bracket
1. Make sure the power is off and the power cable
is unplugged. Place the printer onto a
smooth surface and open the top cover.
2. Remove the Left Top Cover from the printer.
3. Remove the covers of Ethernet port and
Antenna port from the back plate of the
printer.
4. Secure the WLAN module onto the module
bracket.
5. Plug the connector into the socket on WLAN
module.