GoDEX EZ6000Plus series User Manual
Remove the two screws securing
the connector bracket from the
inside of the printer housing.
Now attach the rewinder
connector bracket supplied.
Connect the rewinder connector
bracket to the motherboard as
shown in the illustration.
10. Remove the cover for the
11. Remove the retention clip from
12. Secure the rewinder on the
printer housing using the four
Please make sure that all rewinder
cable connectors are arranged on the
side of the motherboard before you
tighten the screws that secure the
13. Connect the "Rewinder full"
switch to the jack on the rewinder
This manual is related to the following products: