GoDEX EZ6000Plus series - Manual (Page 37)

33
EZ-2000+/6000+ User ’s Manua
10. Put the Washer first and then tighten the Nut
on the Antenna Connection Wire.
11. Turn the Antenna according to the direction as
arrow showed to mount it on the Antenna
Connection Wire. The angle of Antenna
can be adjusted if needed.
12. Reassemble the Left Top Cover to complete
the installation.
Note 1:
After the WLAN module installation is completed,
please send
the "^lan" printer command to printer for
activating the Ethernet connection function. Please
mind that USB port will be deactivated once the
Ethernet connection function is activated.
Note 2:
The first time setting operation must be performed
with Ethernet (wired) connection before you can
access wireless network.