GoDEX EZ6000Plus series User Manual

Page 45

background image


EZ-2000+/6000+ User

’s Manua

14. Install the motor in the back

section of the printer housing and
align it with the 4 screw holes.

15. Do not tighten the screws fully, to

leave room for installing the belt.

16. If required, adjust the position of

the motor during installation of
the belt.

17. Now tighten the screws securing

the motor.

18. Gently pull the rewinder

connection cables so they are
fully inside the printer housing.

This manual is related to the following products: