GoDEX EZ6000Plus series - Manual (Page 53)

49
EZ-2000+/6000+ User ’s Manua
4-7. Installing the parallel / PS/2 adapter
1 Parallel cable
1 2
3 4
2 Parallel / PS/2 adapter
3 Connection cable
4 Screws (set of 2)
1. Check whether the
printer is switched off.
Place the printer on a
flat surface and open
the printer cover.
2. Unscrew the two screws
marked in the illustration
on the right and remove
the left-hand side of the
printer housing.
3. Unscrew the screws on
the parallel port cover
and remove the cover.