GoDEX EZ6000Plus series - Manual (Page 47)

43
EZ-2000+/6000+ User ’s Manua
27. Now load the label stock.
28. Pass the label stock through the
rewinder from the bottom up.
Secure the label stock on the
rewinder using the retention clip.
【 Note 】
Make sure you choose the correct
rewind direction.
29. Replace the printer cover to
complete the installation.
【 Note 1 】
Before you start using the rewinder,
please make sure that you have
carried out all steps as shown in the
illustrations. Then send the command
"^XSET,REWINDER,1" to the printer to
enable the rewind function.
【 Note 2 】
To use the label dispenser, you have to
remove the rewinder guide again.