GoDEX EZ6000Plus series - Manual (Page 63)

59
EZ-2000+/6000+ User ’s Manua
5-4. Cleaning the thermal print head
Dirt on the print head or ribbon may
result in inadequate print quality (no
printed image on part of the label).
The printer cover should therefore be
kept closed whenever possible.
Keeping dirt and dust away from the
paper or labels ensures a good print
quality and a longer lifespan of the
print head. Here is how you clean
the print head:
1.
Switch off the printer.
2. Open the printer cover.
3. Remove the ribbon.
4. Release the print head by
turning the print head release
lever.
5. To remove any label residue or
other dirt from the print head
(see blue arrow), please use a
soft lint-free cloth dipped in
alcohol.
【 Note 1 】
The print head should be cleaned
once a week.
【 Note 2 】
Please make sure that there are no
metal fragments or other hard
particles on the soft cloth used to
clean the print head.