Laerdal SimMan 3G Mystic - Manual (Page 12)

9 10
Attaching the Right Arm
Open the torso as described in steps 1 - 4, Opening the Torso.
Follow the procedures listed below in reverse to detach the arms.
1 Ensure the white Arm Adapter is in place. If not, fit the Arm
Adapter into the hole in the arm bracket from inside the torso.
Ensure that the flat edge of the adapter is facing the chest hinge.
2 Feed the washer, then spring, then washer onto the bolt and feed
through the arm.
3 Tighten the screw with a Phillips head screw driver.
4 Replace the deltoid pad.
Inserting and Connecting the Batteries
Open the torso as described in steps 1 - 4, Opening the Torso, follow
the procedures listed below in reverse to remove the batteries.
1 Release the battery clamp by unhooking the clips on either side.
2 Insert both batteries into the battery tray.
3 Snap the battery clamp back into place over the batteries.
4 Connect the corresponding battery cables from the batteries to
the torso.
Manikin Setup