Laerdal SimMan 3G Mystic - Manual (Page 20)

17 18
System Setup
3G View and Classic View
There are two view options when running a simulation in Instructor
Mode:
INSTRUCTOR MODE 3G VIEW
Scenarios made for SimMan 3G and will display the 3G view:
INSTRUCTOR MODE CLASSIC VIEW
Recommended for experienced users of older SimMan versions:
Classic view makes use of the Learner event libraries of previous
SimMan versions; so that custom-made scenarios made with older
SimMan software can be used seamlessly with SimMan 3G. Therefore
SimMan Scenarios made before SimMan 3G will by default display the
Classic view after conversion.
Opening an Auto Mode Patient
Case
To start a simulation in Auto Mode:
1 Launch the <Instructor
Application> on the
Instructor PC.
2 Select the Manikin you wish to connect to and click ‘OK’.
3 Click ‘Start Auto Mode Patient Case’. This will open the Patient
Case Library.
4 Browse the patient cases using the library menu on the left. The
menus can be expanded and collapsed by clicking on the ‘+’ and
‘–’ buttons.
5 Choose a patient case and click ‘OK’.
6 The patient case will open with the simulation being PAUSED.
When you are ready to begin the simulation, press the spacebar.
OR Click the ‘Start session’ button in the bottom left corner
of the screen.