Laerdal SimMan 3G Mystic - Manual (Page 14)

11 12
Charging the Batteries
INSIDE THE MANIKIN
1 Connect the manikin to the external power supply with a power
cord and plug that meets local specifications.
2 Plug the power supply into a wall outlet and connect the power
cable to the power inlet on the manikin’s power panel.
POWER
3 Press the ON button to power on the manikin.
Note: During start-up, the manikin’s eyes will blink a couple of
times and the power status indicator will show a yellow (start-up)
light.
WITH AN EXTERNAL CHARGER
Charging batteries inside the manikin
1 Connect the manikin to the external power supply.
2 The battery indicator on the power panel shows the charge status
of for the internal batteries.
External battery charging
The battery charger comes with 5 international plugs. Connect the
appropriate plug to the charger:
1 Connect the charger to a power outlet and connect the manikin
battery to the charger.
2 The indicator light on the battery charger shows charge status.
3 Battery charging time is approximately 3 hours.
The external battery charger should only be used with SimMan 3G
batteries.
Charger light showing battery sign
Light Code Light Color Characteristic
Standby Yellow Steady
Pre-charge Yellow Normal Blink
Rapid charge Green Rapid
Maintain Green Normal Blink
Ready Green Steady
Wait Alternating Alternating
Error Yellow Rapid
Manikin Setup