Laerdal SimMan 3G Mystic - Manual (Page 60)

58 57
Troubleshooting
Main Specifications
Size, weight
Dimensions (manikin only): 1800mm (l) x 550mm (b) chest
(5.90 ft x 1.80 ft)
Weight (patient manikin only): 38,5kg (85 lbs)
Weight (with clothes)
40 Kg (88 lbs)
Manikin power
External power:
Input voltage 24VDC, 6.25A
Internal batteries (two): Each 14.8V, 4.6Ah, Lithium-Ion
Only use the SimMan 3G external power supply and batteries.
Air & CO
2
Pressure
Internal air tank: Max 0.85 bar
External air connection: Max 1.4 bar
External CO
2
to manikin: Max 1.4 bar
Temperature Limits
Operating temperatures: +4 ºC to 40 ºC (39 ºF to 104 ºF)
Storage temperatures*: -15 ºC to 50 ºC (5 ºF to 122 ºF)
* Clean the blood and fluid systems as indicated prior to long term
storage.
Environment - Manikin only
Relative humidity: 20% -90% (non-condensing)
DO NOT use outdoors in wet conditions.
Not tested with salt spray.
RF Communication
WLAN frequency ranges:
2.4 GHz WLAN, channels 1-11.
5 GHz WLAN, channels 36, 40, 44 and 48.
Operation range: 100 m (300 ft) outdoors.
RFID frequency ranges:
13.56 MHz
Operation range: < 0,2m
Material Chart for Manikin
Clothes: Cotton, Nylon
Skins and airways PVC (DEHP free)
External hard plastics: PP, PA, PC, PC/PET
Inner plastics:
Silicone, TPU, TPE, PVC, Nitrile
PA, PA+GF, PC, ABS, POM, HDPE, PET, Latex
Metal components: Aluminum, Brass, Steel
Minimum Hardware Requirements:
• Core 2 Duo or better
• 1 GB RAM (2 GB recommended)
• 1GB hard disk space,
• 1024x768, 1280x800, 1280x1024 or better
• 16bit color resolution or better
• 100% DPI required
• Optical drive required for installation
Minimum Software Requirements
• Windows XP or Windows 7
• DotNet 3.5.1
Acceptable Fluids for Manikin
Cleaning Fluids
To clean the manikin’s fluid system use one of the following:
• 60% Isopropanol alcohol
• 70% Ethanol
Simulated IV Fluids
Only use purified water to simulate IV fluids:
• Distilled Water
• Deionized Water