Replacing manikin skins, Replacing blood system filter, Maintenance – Laerdal SimMan 3G Mystic User Manual
Page 56
54
53
Maintenance
Replacing Manikin Skins
The manikin skins may need to be replace if they become torn,
perforated or stained.
1 Unzip and roll off the skin
2 Applying powder to the inside of arm, torso and leg skins will help
reduce friction and make replacing the skins easier.
To prevent the zippers from separating from the skin, make sure to
properly position the skin halves and hold them together while zipping
them closed.
Replacing Blood System Filter
If reduced blood flow is experienced, the filter may be clogged and
needs replacement.
Never run the manikin without filter.
1 Turn off the manikin.
2 Remove genitalia with the catheterization assembly for easy access.
3 Disconnect the filter from the right leg and pelvis blood tubes
and remove it.
4 Connect a new filter by reversing the steps above.
Bloo
d R
igh
t L
eg