Installing the amputated lower calf skin, Setup for simulation – Laerdal SimMan 3G Mystic User Manual
Page 36
33
34
Setup for Simulation
2. Apply a liberal amount of baby powder to the inside of the skin
and leg and pull the skin all the way up the Amputated Thigh.
3 Fold the skin half way down and carefully insert the Foam IM Pad
underneath the skin. The Foam IM Pad could tear if mishandled.
4 The foam IM Pad should sit 1" (2.5 cm) from the top edge of the
Amputated Thigh. Fold the skin back up.
Installing the Amputated Lower
Calf Skin
1
Access the ankle bolts by folding the skin up. Remove the ankle
bolts using two Phillips head screw drivers.
2 Carefully fold down the skin of the foot to expose the two pulse
units. Disconnect both units and route the wiring out of the foot.
Roll the wires together and store in the bottom of the ankle.
3 Apply a liberal amount of baby powder inside of the Amputated
Lower Calf Skin and lower leg. While matching the contours of
the skin to the calf, pull the skin up the manikin's lower leg untill it
fits tightly.